The study showed that the densified process should be divide into two stages - solid phase sinter stage and liquid phase sinter stage 研究表明,液相燒結mo - cu合金的致密化過程分為固相燒結階段和液相燒結階段。
Many researches have showed that the mechanical properties of al2o3 - matrix ceramics in which ti ( c , n ) , tic or tin was dispersed could be improved a lot , which might be widely used in the field of machining . al2o3 - matrixed ceramics were fabricated by gas pressure sintering ( gps ) and gps with post - hip based on current techniques in this experiment . for al2o3 - ticn composite ceramics , the densitification process was controlled by the mechanism of solid phase sintering . 大量研究表明:采用ti ( c , n ) 、 tic或tin作為第二相彌散顆粒所制備的氧化鋁基復相陶瓷相對al _ 2o _ 3單相陶瓷而言,性能有了顯著的提高這類復相陶瓷性能優良,在機械加工領域有著廣泛的應用前景本實驗采用氣壓燒結( gps )以及gps結合熱等靜壓( hip )后處理兩種工藝制備氧化鋁基復相陶瓷。